SYS3000PID series photoion VOCs monitoring system

SYS3000PID series VOCs online monitoring system is a gas monitoring system developed for real-time measurement and alarm of VOCs concentration in fixed pollution sources or factory boundaries. The system is mainly composed of sampling unit, analysis unit, control unit, communication unit and other parts. The analysis unit adopts a TVOCs analyzer based on nano-ceramic tube PID technology with automatic cleaning and automatic zero adjustment functions. Its key technical indicators such as sensor life, anti-interference ability in harsh environments, and long-term stability are at the international leading level. The system can also detect a number of related parameters such as gas flow rate, pressure, temperature and humidity at the discharge port of the pollution source, and calculate the emission rate and amount of total VOCs.

 

 

 

 

SYS3000PID series VOCs online monitoring system is a gas monitoring system developed for real-time measurement and alarm of VOCs concentration in fixed pollution sources or factory boundaries. The system is mainly composed of sampling unit, analysis unit, control unit, communication unit and other parts. The analysis unit adopts a TVOCs analyzer based on nano-ceramic tube PID technology with automatic cleaning and automatic zero adjustment functions. Its key technical indicators such as sensor life, anti-interference ability in harsh environments, and long-term stability are at the international leading level. The system can also detect a number of related parameters such as gas flow rate, pressure, temperature and humidity at the discharge port of the pollution source, and calculate the emission rate and amount of total VOCs.

Long life PID sensor

PID sensor using nano-ceramic tube technology, the life of PID light source is up to 20,000 hours, and the expected life is more than 5 years;
Excellent detection performance

​​​Sensitive detection and rapid response, the lowest detection concentration can reach ppb level, the highest detection concentration can reach 10000ppm, and the system response time is T90<20 seconds;
Support a variety of communication interfaces

​​​High versatility, providing 4-20mA, HART, RS485/MODBUS, Ethernet, relay output and other communication interfaces;
High reliability and maintenance free

​​​Automatic calibration, reset, backflush functions, maintenance-free design;

Meet environmental monitoring requirements

​​​The system can support the HJ/T212-2005 communication protocol of the Ministry of Environmental Protection and meet the technical requirements of the Ministry of Environmental Protection HJ477-2009;

Technical parameter

name parameter value
detect gas Various volatile organic compounds VOCs
Detection principle Photoionization PID
scope of test 0-5, 10, 50, 100, 500, 1000, 10000 optional (other ranges can be customized)
Units of measurement ppm or mg/m3
Detection method Built-in pump suction
Sampling flow <300ml/min
Accuracy ≤±10% or ±5%FS (whichever is greater)
Repeatability <2%
Resolution 0.01, 0.1, 1 (related to range)
Minimum detection limit 0.05ppm (isobutylene)
Response time T90<20S
Power supply 24VDC (15-30V)
communication method 4~20mA, HART, RS232, RS485, Ethernet
ambient temperature -40℃ ~ +70℃
environment humidity 0~99%RH/No condensation
Sensor life >2 years
Dimensions 400x700x1600mm (LxWxH)
weight 35kg (depending on configuration)
Air source requirements Isobutylene standard gas cylinder (for automatic calibration), compressed air (0.4~0.8mPa, optional for automatic purging)